Tuesday, April 16, 2013

DIY Plain White Tee Shirt Refashion {Lace Front with a Peter Pan Collar}


Pin It

Have you found that the fashion world passes you by when you have a baby? By the time I actually fit back into my clothes they are all out of style! So what is a girl to do? Take those clothes and make them fabulous!


Pin It

Let the refashioning begin! 


I started with a plain white tee, a seam ripper and this pin from Pinterest.


At this point you need to evaluate your shirt.  Does it already fit you or is it too big? Mine fit just right so I couldn't cut the seams, I had to ....unpick. Dun Dun Dun.  I unpicked all the seams except for the hems.  Next I cut off the old collar using a pattern that I made from an existing shirt I liked.


Take the front of your shirt and use it as a pattern to cut out the lace piece.  I got my lace from JoAnn's. I found it tricky to sew the lace onto the tee because the tee was so stretchy and the lace, not so much.  I cut out my lace to be the exact size of my tee shirt.  As I sewed, the T-shirt material stretched  more than the lace.  Because of that, the lace didn't end up being as long as my shirt.  I actually ended up liking the look of that but if you want your lace to go all the way to the bottom of your shirt or longer, make sure you cut out more fabric.  Sew the lace onto the whole front of the shirt- sides, collar, arm holes, everything.  I also found it easier to sew with the lace side down.


Pin It

I chose to only put lace on the front of the shirt.  You can see this in the picture above.


Now we are going to put the shirt back together.  Once the lace is attached, sew the front to the back at the shoulder seams, right sides together.  Pin and then sew the sleeves back in.  Once both sleeves have been sewn back in, pin the sides right sides together.  Do this all the way up, pinning together the bottom part of the sleeve as well.   Now you can sew one stitch down each side and you will sew up the sleeves as well as the sides.


You now have your lace front shirt.  On to the peter pan collar.  


I used wrapping paper to make my peter pan collar pattern.  I traced the bottom of a round pitcher to get a nice round collar for my pattern.  I just eyeballed the pattern and sketched it with a pencil around where the collar would go.  Honestly I had to make 2 patterns before I got it looking right.  Here is a nice little tip, once you have drawn it out, you can use two pencils hooked together and trace it again to get the right seam allowance.   Cut it out and pin it on to make sure it will work.  


I folded my pattern in half and cut 2 out on the fold of my black fabric.  I marked where the center would be on my shirt and tested the fabric collar on the shirt to make sure it fit.


When you know it fits, take it off.  Cut out your interfacing slightly smaller than your pattern and attach it to the back side of the piece that will be the top side of your collar.  With right sides together, sew the two pieces of collar together just around the outside.  Do not sew the part that will be attached to the shirt.   Snip little triangles out of the rounded seam allowance portions of the collar so that it will lay nicely.  flip it right side out and iron it so that it is nice and flat.


Mark the center again and attach the unsewn side of the collar to the raw edges of the right side of the shirt collar.  That sounds confusing doesn't it! Just make sure that when you pin in the collar, the collar is on the inside of the shirt so that after you sew it and flip it out you won't see the stitching.


To make sure the collar lays flat, sew it down on the top side as close to the edge as possible.


 Wahoo! done!! 


Pin It

I have to add this next picture because it is kinda cool and kinda creepy at the same time.  It is like I am locked in a zombie's death ray.


How does it wash? I have not clue.  We will find out tomorrow when it takes it's first swim in the washing machine.

*Update: I washed it and it is still perfect! The lace didn't fray at all and the collar is as crisp as ever. Score!

Visit thecsiproject.com

14 comments:

  1. This is adorable! Thanks for the tutorial. If you get a chance, please share it on my linky party: http://suburbsmama.blogspot.com/2013/04/sunday-linky-party-3.html

    ReplyDelete
  2. I love the collar! Been meaning to make something like this too. :)

    Aki
    mintedstrawberry.blogspot.com

    ReplyDelete
  3. This is super cute and your tutorial is great. Thanks!

    ReplyDelete
  4. Love this! I've been wanting to add a Peter Pan collar to one of my shirts but haven't gotten around to it. Now it's at the top of my priority list!

    ReplyDelete
  5. Thanks for linking to Take-A-Look Tuesday over at Sugar Bee Crafts - you were featured today!
    --Mandy, www.SugarBeeCrafts.com

    ReplyDelete
  6. Wow! This is so stinkin' adorable! I wish I could sew! I'm visiting from Tater Tots and Jello! Hope you'll come visit sometime! Have a great weekend!

    -Bonnie @ Revolutionaries
    www.revolutionariesblog.com

    ReplyDelete
  7. You look beautiful. And I love the simple appeal of your refashioned T (black and white, darling collar...) Lynaea @ EveryDayBloom.com

    ReplyDelete
  8. Love, love, love! Thanks for taking the time to write such a great tutorial as well. I hope you will come link up to The CSI Project this week. The challenge is sewing. You can link up to 3 projects. Winners will be chosen by our guest judge.
    Come on over!
    www.thecsiproject.com

    ReplyDelete
  9. WOW. This is impressive. I am shocked to see how 1. simple you made it look and 2. the supplies you used to make it. And, you look absolutely stunning in it. I think your 'zombie' picture makes your eyes look memorizing. Lovely job.

    ReplyDelete
  10. thanks for your tutorial! i found a lot of nice patterns but none showed how to actually attach it to the shirt(most were detachable collars/necklaces) i thought i knew what to do but thanks to you i ma sure, thanks again! :]

    ReplyDelete